Miniature Stepper Motor Driver Controller CANopen Bus Small Volume

PMC007xx is a kind of miniature integrated stepper motor microstepping controller, which can be directly installed in the rear 42 series stepper motor. The series controller provides a variety of models which can be chosen based on bus control of CAN and different current value. It is easy to achieve industrial control network of as many as 120 nodes, which can achieve closed-loop control based on the encoder according to the requirements of customer. PMC007 provides a simple and rich set of control commands, which not only greatly simplifies the complexity of the upper layer control system, but also maximally reserves flexibility of control, and is suitable for all kinds of high precision, wide range of industry using. 

Features: 
1. Wide range of 12-48V single voltage supply
2. High speed and high torque
3. Output  current  0.5A  ~  6A,  Adjustable phase current by commands
4. Automatic control of S curve acceleration and deceleration
5. The acceleration / deceleration / start / stop speed can be configured separately.
6. 2 external switches input ports for configurable emergency stop
7. Support 0/2/4/8/16/32/64/128/258 microstepping resolution
8. Support 4/6/8 lines of 2/4 phase stepper motor
9. 10 GPIO ports, direction and pullup/pulldown register of each port can be separately configured
10. Record and feedback of Motor position
11. Burning and off-line automatic execution  of custom program
12. CAN communication interface
13. Miniature size 42mm*42mm*18mm
14. Precision  aluminum  shell, conducive to the protection and heat dissipation
15. Online firmware upgrades
16. Control routines and the underlying driver based on VC++

Electrical Characteristics: